Showing posts with label audio. Show all posts
Showing posts with label audio. Show all posts

KICKER ZX Series ZX1500.1 - Amplifier - 1-channel Review

KICKER ZX Series ZX1500.1 - Amplifier - 1-channel
Average Reviews:

(More customer reviews)
this amplifier is very powerful at 1500W RMS at 2 ohms, thats right 1500W RMS not 1500W Peak like some other manufacturers, this amp can easily power 2 - 2 ohm Solo Baric 12" L7s or 1 - 2 ohm Solo Baric 12" or whatever combination you choose.
this amp comes with a remote bass control, a 150A fuse, built in crossover and and is quite small actually but big on power, i believe the picture amazon has is of the ZX2500.1
in my install, i use the built in crossovers, bass boost and decided to store my kicker KX3 crossover in the closet and you would not believe that built in crossovers work this great, i didnt until i heard my system.
this system is in my 2000 4dr civic and is placed on the wall of the trunk on the right hand side. this amp gets very very hot but the heat sinks are very effective as this amp does not shut down on me. this amp has thermal protection, short circuit protection, soft start turn on and over current protection.
the gain, crossover and bassboost controls are mounted on top the amplifers with easy to use and easy to access knobs making those tight installs like mine simple. most gain controls are mounted on the side and you need a flathead screwdriver to adjust the gain, in my install i would have to take my amp off the wall to adjust the gain and other settings, i cant imagine a greater inconvenience.
overall a small amp(in terms of size NOT power), extremely powerful and great value for money.

Click Here to see more reviews about: KICKER ZX Series ZX1500.1 - Amplifier - 1-channel

ZX is pure KICKER power, ultimately developed to fuse with KICKER subwoofers and speakers for an incredible musical experience in any vehicle. But ZX power can be used with any gear in any installation - there's an option for every need.ZX-Series Amplifiers provide power in stereo, multi-channel, hybrid, or mono formats and are available in 20 different models, allowing plenty of options to exactly match any installation. And they'll visually add to any system a dark, rugged touch that leaves no doubt to the sorcery going on under its shroud.

Buy Now

Click here for more information about KICKER ZX Series ZX1500.1 - Amplifier - 1-channel

Read More...

Polk Audio CSi5 High Performance Center Channel Speaker (Single, Black) Review

Polk Audio CSi5 High Performance Center Channel Speaker (Single, Black)
Average Reviews:

(More customer reviews)
I am a consumer electronics professional and have been in the business for 20 years now. I say this just to add some context for this review and to let readers know that I'm far pickier than most users.
Given how much of a movie comes from the center channel, it is arguably the most important speaker in any home theater system. Before this I had a high-end Infinity with dual 5.25" mid/woofs, but found it to lack depth. The clarity and openness were great, but I wanted to feel the menacing timbre in Darth Vader's voice and get the full impact of a baritone singing voice, which I felt was missing.
They say that your center should be the same type of speaker as your fronts, but putting a tower on your TV is a bit excessive, even for me. So I did the next-best thing.
The CSi5 is an imposing speaker with dual 6.5" woofers, a sizable ported cabinet, and a clean but not shrill tweeter. The subdued highs of the tweeter were actually what made it such a good match for my Phase Tech front speakers.
Well, while I definitely got the depth I was after, and the highs are wonderfully mellow, the problem is that the speaker lacks the openness of the Infinity. I thought the thick and dense cabinet would solve this problem, which I've heard in other Polk speakers of lower quality, but it didn't. The sound is very localized and often sounds like it's coming from a box, which, of course, it is.
I've always liked, if not always respected, Polk speakers, and actually had a pair of the old Monitor 10B speakers. They were boomy and a little too sparkly, but they had a pleasing sound and were more open than today's models. They started messing with the two-way design they used in all of their speakers--all the way up to their monstrous SDA SRS1.2s--and wound up kicking themselves in the butt.
It's a good speaker, but to a guy that values open sound above so many other aspects of sound quality, this is a tough pill.
-Doug

Click Here to see more reviews about: Polk Audio CSi5 High Performance Center Channel Speaker (Single, Black)

Center channel speakers easily carry the 50% or more of center channel info delivered in multi-channel sources for home theatre systems. The Polk Audio CSI A5 Center Channel Speaker has an upside-down aimable cabinet to give you placement flexibility and finer sound-tailoring for your high performance home theater system. It is also timbre-matched to fit into any Polk Audio home theater or multi-channel music system for a more realistic and seamless surround sound environment. The CSi A5 features the latest generation of Dynamic Balance polymer composite drivers for smooth wide-range response with low distortion as well as a 1-inch silk/polymer dome tweeter to deliver better sound detail. Ventingthrough the rear panel Power Port and the front panel ARC port vastly reduces chuffing or port noise. It provides deeper, more powerful, lower distortion bass than other conventional ported or sealed designs can offer. All-MDF construction creates an acoustically inert cabinet. You are assured classic Polk performance in a design that speaks to today's high-end home décor. True performance art.

Buy Now

Click here for more information about Polk Audio CSi5 High Performance Center Channel Speaker (Single, Black)

Read More...

Stinger SP2150 Power Series 2150-Amp Battery Review

Stinger SP2150 Power Series 2150-Amp Battery
Average Reviews:

(More customer reviews)
I have a 1000 watt Alpine V-Power sub amp, and a 4 channel 70 watt RMS highs amp. 10" ported subwoofer, Alpine highs and mids. I notice that I can now turn my car off with the radio and AC still on full blast. The car has always started back up. My car used to not start ALL THE TIME. Also, when I bump my bass, it will be LOUD AS HELL for about a minute or so (Makes my 10" sub sound like two 12"s), then it seems that the Stinger battery drains out. After that my bass gets much quieter. Still, the peice of mind of always starting your car makes this worth buying. And it's probably the highest quality/most powerful battery capacitor you can buy. I used to use two digital capacitors. Never use capacitors, don't believe all the greedy salesmen. Use one of these instead. Trust me. This batcap was very easy to install and stays put thanks to the mounting bracket that comes included.

Click Here to see more reviews about: Stinger SP2150 Power Series 2150-Amp Battery

Power Series 2150-Amp Battery

Buy NowGet 37% OFF

Click here for more information about Stinger SP2150 Power Series 2150-Amp Battery

Read More...

Brand New Hifonics Hfi2500d 2,500 Watt RMS Mono Block Amplifier with New Retro "Hf" Logo and New Designed Heat Sink for Improved Heat Dissipation Review

Brand New Hifonics Hfi2500d 2,500 Watt RMS Mono Block Amplifier with New Retro Hf Logo and New Designed Heat Sink for Improved Heat Dissipation
Average Reviews:

(More customer reviews)
Have this amp hooked up to 2 Kicker L7 15 inch subwoofers 1k rms each 2k max. Oh god they pound like hell. This amp is a great price I installed it on my SUV Ford Expedition. the bass remote knob is a good add on feature to. Makes my lights dim a little bit. but overall its good better than a 800$ amp thats just my opinion.

Click Here to see more reviews about: Brand New Hifonics Hfi2500d 2,500 Watt RMS Mono Block Amplifier with New Retro "Hf" Logo and New Designed Heat Sink for Improved Heat Dissipation

Brand new Hifonics HFI2500D 2,500 watt RMS mono block amplifier with new retro "HF" logo and new designed heat sink for improved heat dissipationFeaturesNew Hifonics HFI2500D HFi Series 2500W Single Channel Monoblock Class D Car AmplifierRMS Power at 4 ohms: 850 watts x 1 chan.RMS Power at 2 ohms: 1700 watts x 1 chan.RMS Power at 1 ohms: 2500 watts x 1 chan.Maximum Power Output: 2500 wattsBlue military grade PCB boardPulse Width Modulated MOSFET power supplyHFR-3 remote bass level control includedAdjustable Bass Boost (0 to +10 dB bass boost at 45 Hz)Blue illuminated retro Hifonics "HF" logoMono Amp Capable Of Powering Multiple SubwoofersPreamp RCA OutputsRCA Inputs4-Way System Protection Circuitry for Maximum amp ProtectionDual 12 Gauge Speaker TerminalsAdvance Heat Sink Design for Maximum Heat Dissipation Silver nickel-plated RCA level inputsSilver nickel-plated screw terminalsAdjustable Input sensitivity level: 200mV-6VAdjustable low-pass filter (30-250 Hz, 24 dB/octave)Subsonic filter (15-35 Hz)Damping factor: >200Frequency response: 15-250 HzDimensions: 19-3/4"L x 8-13/16"W x 2-7/16"HPower and Ground Inputs: 0 Gauge

Buy Now

Click here for more information about Brand New Hifonics Hfi2500d 2,500 Watt RMS Mono Block Amplifier with New Retro "Hf" Logo and New Designed Heat Sink for Improved Heat Dissipation

Read More...

Dual MXDM70 AM/FM/CD/MP3/WMA Weather Receiver Review

Dual MXDM70 AM/FM/CD/MP3/WMA Weather Receiver
Average Reviews:

(More customer reviews)
I bought this marine stereo for my Jeep, since in the past stereos have sub-come to rain or even a little dew settling on the interior. Overall I like it. I gave it four starts because it seems to skip a little more often than I'd like. However in a Jeep, you feel every gum wrapper and cigarette butt in the road as it is, so I can live with it. What makes up for the occasional skip, is the MP3 player plug-in (who cares about skipping CD's, when you have an iPod anyway) and the weather band is a great feature also. The display is super bright, which is good for open air driving when the sun is overhead. Another nice feature is that the power button stays lit when the stereo is off, a nice detail when glancing at you dashboard in total darkness. All in all, it's a good stereo and I recommend it for Jeeps, motorcycles, and even for you boaters.

Click Here to see more reviews about: Dual MXDM70 AM/FM/CD/MP3/WMA Weather Receiver

Designed for life on the open water, the Dual MX-DM70 marine CD player/receiver makes a great foundation for a boat-based stereo system. The receiver features a powerful built-in amplifier (50 watts peak x 4) that powers a quartet of speakers, along with a host of marine-ready extras, such as clear-coated circuit boards, a rust-resistant chassis, and a detachable UV-resistant face with a negative white display. As a result, the stereo stands up to light rains, ocean spray, scorching sun, and almost any other weather condition. The CD player, meanwhile, is compatible with CDs and most CD-Rs, including discs loaded with WMA and MP3 files. The unit even displays track names and artist info on its black-and-white LCD screen, making it easy to find your favorite songs in the midst of a cross-lake cruise. And don't fret when you hit a huge wave, as the MX-DM70 includes an anti-shock mechanism that guarantees smooth playback in rough water.
Further versatility stems from the system's quintet of preset tone curves--which let listeners customize the audio settings based on genre and taste--and the built-in AM/FM radio with 30 presets (20 FM and 10 AM). Plus, the radio picks up several weather bands, so you can check the weather conditions before you head out. And finally, the system includes an auxiliary input with a mountable "iplug" adapter that connects to such audio sources as an iPod, MP3 player, or satellite radio receiver. It's never been easier to haul along your entire music collection while boating.
Additional features include a single set of 3-volt pre-amp outputs (for integrating an external amp or powered sub), selectable European and U.S. tuning, independent bass and treble controls, and a built-in clock. The MX-DM70 fits in most pre-installed dash openings and carries a one-year warranty on parts and labor.
What's in the Box CD player/receiver, installation and mounting hardware, user's manual.

Buy NowGet 3% OFF

Click here for more information about Dual MXDM70 AM/FM/CD/MP3/WMA Weather Receiver

Read More...

Power Acoustik CPT1-5500D Mono Block 5500 Watt 1 Ohm Stable Class D with Dash Mount Remote Gain Control, Phase Switch and Selectable 45Hz Bass Boost Review

Power Acoustik CPT1-5500D Mono Block 5500 Watt 1 Ohm Stable Class D with Dash Mount Remote Gain Control, Phase Switch and Selectable 45Hz Bass Boost
Average Reviews:

(More customer reviews)
Great amp for the price. A lot of power.
Using this amp with 2 Earthquake DBXI-12D subwoofers. It blows like hell !
Be sure you have an extra battery (I use a Northstar battery (NSB75) for this kind of amp.

Click Here to see more reviews about: Power Acoustik CPT1-5500D Mono Block 5500 Watt 1 Ohm Stable Class D with Dash Mount Remote Gain Control, Phase Switch and Selectable 45Hz Bass Boost

Big Power - Small price! Mono Block Features \' 1 Ohm Load Stable Class A/B or D \' Variable 12dB 50-250Hz LPF \' Variable 12dB 20-50Hz Subsonic Filter (Class D) \' Selectable 45Hz, 6/12dB Bass Boost \' Freqency Response: 15-150Hz \' Signal-to-Noise Ratio: 80dB \' Total Harmonic Distortion: .5% \' 180o Phase Switch (Class D) \' Direct 2 ga. Power & 8 ga. Speaker Terminals \' Dash Mount Remote Gain Control \' Bridged Synchronization (strap amps together for double power!) \' Extruded Aluminum Chassis \' Black Texture Finish w/ Silver Trim & Cast Metal Badge \' MOSFET PSU Transistors \' Regulated PWM Power Supply \' Three-Way Protection Circuitry (short, thermal & overload) \' High Pass, Low Pass, and Subsonic Filters\' Pre-Amp Outputs \' 200mV-8V Low Level Input

Buy NowGet 61% OFF

Click here for more information about Power Acoustik CPT1-5500D Mono Block 5500 Watt 1 Ohm Stable Class D with Dash Mount Remote Gain Control, Phase Switch and Selectable 45Hz Bass Boost

Read More...

Monster MPC S402 SW-250 Extreme Low Noise 2-Conductor Speaker Wire (250 feet) Review

Monster MPC S402 SW-250 Extreme Low Noise 2-Conductor Speaker Wire (250 feet)
Average Reviews:

(More customer reviews)
For those looking for research on this product it is hard to find. Below is a little about the product.
-10 gauge per wire
-The microfiber is only around the small wires
--Microfiber must come off before installation and can be removed with finger nails
-Thick and heavy, looks like a 1 or 2 gauge power wire
-Remove the 3 outer layers one by one with an exacto knife
--mesh: cutting motion, use a piece of tape to keep the mesh intact.
--thin outer tubing: light pressure all the way around then once down the middle
--thick inner tubing: lightly press the middle of the knife into it all the way around then down the middle. Work slowly here, as you don't want to cut the wire tubing.
-Remove the individual wire tubing with a 10 gauge stripper. Be careful as there are not many stands of copper
*stripping the wire will most likely take 10-15 min per strand.
The copper wires are thick too. Very good quality. Would recommend with any subwoofer installation. It's something you may even want to show off.
5m is more then enough for two subs within the trunk.
-Keven

Click Here to see more reviews about: Monster MPC S402 SW-250 Extreme Low Noise 2-Conductor Speaker Wire (250 feet)

Whether the thump of house music or the roar of rocket engines, subwoofers add depth and realism to your favorite music,movies and video games. But to get the deepest, tightest bass possible you need to accurately transfer low frequency signals to your amplifiers with maximum efficiency. Specifically engineered for frequencies below 80 Hz and featuring Monster\'s most advanced XLN Xtreme\' construction, QuadraPole and PEX\' dielectric technologies, Monster Performance Car 400 Series Subwoofer Interconnects maximize signal transfer and minimize noise pickup for intense sound with deep, tight, heart-pounding bass.

Buy Now

Click here for more information about Monster MPC S402 SW-250 Extreme Low Noise 2-Conductor Speaker Wire (250 feet)

Read More...

Alpine iDA-X305 - Radio / digital player - Full-DIN - in-dash - 50 Watts x 4 Review

Alpine iDA-X305 - Radio / digital player - Full-DIN - in-dash - 50 Watts x 4
Average Reviews:

(More customer reviews)
This review will be pretty in depth, but will focus primarily on the important things. I'm going to start with the iPod/iPhone stuff first, since I would imagine this is a big reason why many people are looking into this deck.
I will preface this by saying I bought this because I needed a deck that could play music from my iPhone 3G.
*****
UPDATE: I can confirm that the iPhone/iPod 3.0 OS Software is compatible with this deck. In fact, it makes the experience a TINY bit easier because the iPod app no longer launches when you plug in your iPhone/iPod, which means you can be doing something on your phone and not worry about it getting exited when you plug the phone in. It still switches the source to iPod/iPhone, but at least the iPod application on the phone doesn't launch.
*****[iPod/iPhone/USB Stuff]
*******************
This deck supports an impressive amount iPods, iPhone 2G and iPhone 3G, Flash Drives, and most likely many other USB based players. It has a USB port in the back of the unit that screws in to avoid it coming unplugged during normal road bumps, etc. The USB cable they provide you with is nice and long. In my case, it would run almost all the way to the back of my SUV (Buick Rendezvous). It comes with a special iPod/iPhone connector that will charge the iPhone while you play music. Using a normal iPhone cable does not work, the deck gives you an error and throws a fit.
The iPod/iPhone functionality is very solid. It offers most all the sorting types of the iPod (Album, Artist, Song, Playlist) and even will show album art. Though the album art shows up fine when it is smaller, changing the view type to the album art only screen results in blurry/pixelated art work. I was slightly disappointed that there is no "Genius" functionality here, but that feature is pretty new, even to the iPod.
You can advance songs, go back a song, pause, and turn on song or album shuffle on the deck itself.
I personally find it difficult to use the deck to scroll through music, because of how unresponsive the knob is. Turning the knob is very similiar to setting your 10 speed bike to the highest speed. Even though you are pedaling REALLY fast, the tires are moving at a slower pace than if it were at a low speed. If you turn the dial really fast, it only advances 2, 3, maybe 4 spaces on the screen. This makes it hard to scroll through lots of artists, albums, or songs.
Additionally, plugging the iPhone or iPod touch into the stereo cuts off your use of the iPod application, so controlling the song play through your iPod (which I would prefer) is not possible.
Here is the bad part: it is very inconsistent and stubborn when it comes to recognizing my iPhone. If I have the iPod application up and running, then I plug it into the stereo, it will either give me an error on the deck, or tell me the device was not made for the iPhone. This means I have to close the iPod application, then plug it in to the stereo. This wouldn't be so bad, but it also seems to react differently based on whether or not a song is playing, paused, or no activity whatsoever. If I am playing a song when I plug it in, all sorts of crazy stuff happens and I end up having to unplug and replug and then pause and then quit out of the iPod app, and unplug again, then replug before it will work.
Again, wouldn't be so bad, but I find myself spending alot of time just trying to get a song playing instead of just plugging it in and driving.
Also, there is no option to not automatically switch to the iPod source when I plug in the phone. This sucks because if I just want to charge my phone, it will automatically switch the radio to the iPod source, forcing me to push source again to get back. This wouldn't be so bad, but I sometimes listen to Pandora Radio Application through my stereo, and if I am listening to it on my headphones while walking to my vehicle, plugging it into the stereo causes the application to quit, effectively cutting off my music, forcing me to relaunch Pandora and wait for it to buffer my song again. (This may be a personal problem, but it is relevant). It would be nice to turn off Auto Switch as far as the source goes.
Other than no Genius support, not being able to control from the iPhone/iPod itself, and the auto source switch, the iPhone/iPod functionality works well. I just wish I could get in my truck, turn it on, plug in my phone and leave. Instead, getting a song going is a chore. I end up sitting in my truck fidgeting with the deck instead of getting on the road.
[General Use]
***********
You WILL need to read the manual (comes on a CD in the box) in order to figure out some of the functions of this stereo. Though some of it is pretty straight forward, other functions are hidden, or are a string of button presses and knob turns to get to. They managed to make even simple tasks like setting a station preset slightly difficult.
I found it strange this unit does not support RDS, so you will miss out on the useful information that radio stations have to offer in the way of song artist and title, etc..
The clean face plate comes at the price of having to use menus to get to everything, but I expected as much, and boy are there alot of menus.
Two of the front buttons are dedicated to functions that are not even built into the deck itself, so this is kind of frustrating, especially since these addons will cost you upwards of $150 each. It seems like something better could have been put in those 2 slots (but maybe it's just me who may not be buying both addons).
All the buttons and knobs are easy to use and control, though I wish the knob itself was a little bit "stiffer." Turning the knob has inconsistent functionality. Turning it very slowly ensures you advanced to the next item in a list with every tick (clicks are very close to each other), and turning it very quickly has mixed results (sometimes it will advance you only 1 list item, sometimes a few more). Whatever the case, it is cumbersome to scroll through long lists, even with the inclusion of the "percentage" scrolling type set on, which lets you advance to a specific percentage in your music list, etc. This is kind of useless, since I don't memorize, or care to memorize what percent Metallica or any other artist is at...
Additionally, the ring of the knob can be pressed in and turned a quarter of the way to the right or left. This functionality has different uses depending on what menu, feature, or functionality you are using from the stereo.
All buttons are easy to press and sturdy. The face plate itself is very light (a good thing in my opinion) and only the button portion comes off, the LCD stays attached to the unit, making it easier to carry, but the screen itself may still be enough to tempt somebody. The back button is pretty useful and works well, especially when you are new to this unit, because you WILL venture into the wrong menu several times.
You can change the color of the interface from Blue to Red, as well as change the background using the ones built into the unit, or via a flash drive by downloading wallpapers from Alpine's media website.
[Sound]
*******
The deck sounds great. I can crank it up pretty loud (with lotsa room to go higher) and everything still sounds crisp and clear. There is a ton of room for turning volume up and down on this unit, so you will be able to find the volume level that is JUST right all the time. Has separate controls for subwoofer volume and all the fun equalizer stuff you could want (gotta look in the manual for how to do it).
[Expandability]
************
This thing can do pretty much anything you need, but it will cost you big money. It is ready to accept HD Radio, Sirius Satellite, Bluetooth Connectivity, and even an Imprint Sound Processor... but each accessory will cost you $150 plus. It is great they have support for these things, but they are expensive and probably could have been included in the stereo itself, especially when you consider the price tag this baby has. I knew it didn't come with these things when I bought it, but still, when they dedicated 2 of the very few buttons on the face plate to items that are not available in the unit by default, it is kind of frustrating.
There is no CD player built into this unit.
[Final Word]
**********
This is a great unit and has much to offer in the end of owning something fresh and great looking. It definitely stands out and has a nice LCD screen that is put to pretty good use. I wish you could adjust the size of the text on screen, as I like to have more words on screen over having it be more readable.
I hope there is a firmware update to add in genius functionality for the iPod/iPhone and fix the difficulties that can occur with plugging the phone in and getting it to be recognized.
I would definitely suggest this unit to anybody looking for a good deck that supports iPhone/iPod and is looking for ease of use and nice LCD screen space and use. Although it can be a difficult adjustment changing songs with the deck itself, it is stille very likely the best implementation of iPod/iPhone use in a deck to date. Hopefully we will see a firmware update that lets you control the unit from the phone.
If you are looking for expandability, then this is also your unit. You can do pretty much anything you feel if you are willing to pay the price for the addons. It has a nice lengthy USB and all the connections you need for your iPhone or iPod.
*************
* 4/5 Stars
*************

Click Here to see more reviews about: Alpine iDA-X305 - Radio / digital player - Full-DIN - in-dash - 50 Watts x 4


Memory Presets: Preset Stations (FM:12 / AM:6)
Memory: Auto Memory
Seek Mode: Local / DX Selection
Built-In or Ready: Built-In or Ready HD Radio' Ready
Connection: Alpine TUA-T500HD / TUA-T550HD Required
Signal Switching: Automatic Digital / Analog
Multi-Casting: Multi-Cast HD1,HD2,HD3
Supports iTunesA? Tagging: Supports iTunesA? Tagging (TUA-T550HD Required)
Built-In or Ready: Built-In or Ready Parrot Bluetooth Ready
Connection: Alpine KCE-400BT Required. Features may differ between phone model and service providers.
Hands Free: Hands Free Calling
Redial Function: Redial Function
Phone Book: Phone Book Transfer
Call History (Dialed, Received, Missed): Dialed, Received, Missed
Adjusting the volume when receiving a Call: Adjusting the volume when receiving a Call
Voice Dial Operation: Voice Dial Operation
Streaming Music: Streaming Music Playback
Streaming Music Control: Streaming

Buy Now

Click here for more information about Alpine iDA-X305 - Radio / digital player - Full-DIN - in-dash - 50 Watts x 4

Read More...

Kicker CompVR 07DCVR122 2-Ohm 2 Subwoofers In-Vent Box Review

Kicker CompVR 07DCVR122 2-Ohm 2 Subwoofers In-Vent Box
Average Reviews:

(More customer reviews)
Pros - Hard hitting, 1600 watts peak RMS of 800 watts, already 2 ohm, Dual voice coils.
Cons - 2 week break in period if you are not careful you could blow a voice coil.
I am running these powered by a kenwood KAC-X812D (919 watts RMS 2 ohm 1600 watts max) and i am only running the amp at half power and you can here me coming. just follow the break in period and you will be fine. This box and sub package comes from kicker pre-installed and wired for two ohms which is a big plus you can basically just plug and play. Dual voice coils at 2 ohms these subs will rock, rattle, and roll anything you play through them.
you want subs that hit hard on every note than these are the ones that you want to buy.
Great price for box and subs at least 150 off retail price from local stores and crutchfield.com.

Click Here to see more reviews about: Kicker CompVR 07DCVR122 2-Ohm 2 Subwoofers In-Vent Box

CompVR-Loaded Sub Boxes provide more crushing but easy-to-install bass in 2007, adding two new sizes of anarchy to go along with its duo of wicked dual-sub boxes--the VCVR12 with a pummeling 12-inch CompVR Subwoofer, and the VCVR15 with a scorching 15-inch CompVR Subwoofer. The VCVR15 will be available this spring.

CompVR Sub Boxes take the reputation and reliability of dual-voice-coiled CompVR Subwoofers and combine them with sturdy KICKER wood enclosures blanketed with rich gray and black carpeting. New-for-2007 CompVR Subs have been tweaked to near perfection, though it's difficult for KICKER acoustic engineers to get much closer. And all CVR Sub Boxes feature a custom-designed, combination vent/terminal cup, where the impedance designator (2 or 4 Ohm) and oversized port share space.
The dual-sub boxes supply the madness with two of KICKER's most proven round woofers to date. Enraged DCVR12 (12-inch CVRs) and DCVR10 (10-inch CVRs) Dual-Sub Boxes furnish fury like nothing else, delivering the blazing bass of a CompVR subwoofer pair.
DCVR12 Features
CompVR performance in a factory designed enclosure
Large diameter, high flow ports with custom flange and terminal cup
Heavy duty gray carpet

What's in the Box DCVR12 enclosure (2 ohm impedance), Mounting brackets, Installation hardware, User's manual

Buy NowGet 40% OFF

Click here for more information about Kicker CompVR 07DCVR122 2-Ohm 2 Subwoofers In-Vent Box

Read More...

JL AUDIO 12W6v2 - Car subwoofer driver - 12" Review

JL AUDIO 12W6v2 - Car subwoofer driver - 12
Average Reviews:

(More customer reviews)
This is an interesting subwoofer. When I first recieved it, I thought to myself, why are low end frequencies so weak?! At the time the sub was enclosed in a sealed 1.25 cu ft box. I later had to take the sub out of the car after an accident (luckily it wasnt damaged), and had it laying around at home. I later got my hands on a great sub-box modeling software (winISD) and started playing around with settings. Made a custom 6cu ft box with the vented port tuned at 25hz, and man is it different. This sub has become a complete beast. At 30hz I went from from 106db all the way to 120db. 40hz is now 118db compared to 110db. I am convinced JL audio now has one the best subs around. BTW this is being power by a Samson studio amp outputing 600rms (peaks at 650ish) at 2ohms. So if you already have the sub, get a bigger box guys, HUGE diffence. Sorry about the long review, just wanted to share my experience with everyone. If I had to do it all over again, I think I wouldve done the 13w7 instead, sometimes I really wanna crank it up and start dropping pictures off the wall but the sub isnt powerful enough for that :P

Click Here to see more reviews about: JL AUDIO 12W6v2 - Car subwoofer driver - 12"

12-inch subwoofer driver (600W, dual 4 ohm voice coils) 12" subwoofer with dual 4-ohm voice coilspolypropylene W-Cone with polyester foam surroundsolid cast-alloy basketpower range: 150-600 watts RMSpeak power handling: 1,200 wattsfrequency response: 20-200 Hzsensitivity: 85.9 dBtop-mount depth: 7-5/8"sealed box volume: 1.25 cubic feetported box volume: 1.5 cubic feetwarranty: 1 year

Buy NowGet 45% OFF

Click here for more information about JL AUDIO 12W6v2 - Car subwoofer driver - 12"

Read More...