Kicker 08ZX10001 1000-Watt Class D Mono Subwoofer Amplifier Review

Average Reviews:

(More customer reviews)I have had this amp for a couple months now and I have pushed a single L7 12" til I blew it. Then I purchased two L5 12"s and it pushed those with no problem. Now, I have two L7 12" hooked to it and it sounds great running at 2 ohms in parralel. This amp is small and can push anything you throw at it, minus the solo-x's of course. But great amp.

Click Here to see more reviews about: Kicker 08ZX10001 1000-Watt Class D Mono Subwoofer Amplifier

ZX dominance means severe stereo or mono amplifier power surging into corresponding KICKER subwoofers and speakers. ZX dominance also means the utmost reliability from the biggest name in trouble-free amplification and loud, clear sound.
ZX-Series Amplifiers return for 2008 as reliable as ever--21 no-fault options to run a complete car audio system. Two-channel, four-channel, three- and five-channel hybrids, and absurd single-channel subwoofer amps round out a hard-working, noise-free lineup known for supplying the force until the listener shuts the music down. And now all ZX Amps are outfitted with differential RCA inputs, completely eliminating unwanted whines and audio trash and making for the most enjoyable listening experience possible. Differential inputs and new automatic turn-on modes make ZX Amps some of the most complete power producers on the market.
ZX Mono-Channel Amplifiers ZX.1 Mono Subwoofer Amplifiers add one new option to its existing stable of six--the 500-watt ZX500.1 with all the same great benefits. From 300 watts up to a ridiculous 2,500-plus watts, KICKER makes selections available for what it does best... bass. Hiding under an efficient heat sink, ZX sub amps offer a 24dB/octave low-pass electronic crossover and a 24dB/octave subsonic filter fixed at 25 hertz. All have up to 18 decibels of boost centered at 40 hertz, and all come with remote bass control. Optional endcaps are available for all ZX amplifier models.
ZX1000.1 Features
3 automatic turn-on modes
Balanced differential inputs for noise elimination
RCA inputs have direct speaker level input capability
Easily removable top allows for custom painting
Optional end caps
2 ohm stability on all amps
Angled power connections

What's in the Box ZX1000.1 amplifier, Remote bass control, Mounting hardware, User's manual

Get 22% OFF

Click here for more information about Kicker 08ZX10001 1000-Watt Class D Mono Subwoofer Amplifier

Read More...

JL Audio G1700 Review

Average Reviews:

(More customer reviews)I'm running 2 JL audio 13w3's I know this amp is bellow recommended rms for these subs but It Is defiantly loud enough for me. this amp is small and fits right underneath my rear seat. It never even gets hot to the touch. This amp plays loud and clean. I have one of the loudest system's in my city. And my Neighbor's want me DEAD.

Click Here to see more reviews about: JL Audio G1700

FEATURES: JL Audio G-Series Single-Channel Monoblock Class D Car Amplifier RMS Power Rating at 14.4V: 4 ohms: 350 watts x 1 chan. 2 ohms: 700 watts x 1 chan. RMS Power Rating at 12.5V: 4 ohms: 250 watts x 1 chan. 2 ohms: 500 watts x 1 chan. Max power output: 700 watts x 1 chan. MOSFET power supply LED power indicators Remote bass level input (RBC-1 remote level control sold separately) Selectable bass boost (+6dB) Monoblock operation Speaker-level inputs Pass-through preamp RCA outputs Advanced rollback protection system Heavy duty aluminum alloy heatsink for heat dissipation RCA level inputs Screw terminals Variable low-pass filter (40-200 Hz, 12 or 24 dB/octave) Frequency response: 10-250 Hz Dimensions: 12-1/4"L x 9-5/16"W x 2-1/2"H 8-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.

Click here for more information about JL Audio G1700

Read More...

JL Audio XD400/4 - Amplifier - 4-channel Review

Average Reviews:

(More customer reviews)I bought this amp to power a pair of Polk 6.5" component speakers and a JL Audio 8" sub in my 2011 Honda CR-V. The amp is fed with the output from an Audiocontrol 2-channel line output converter. The amp is very small (slightly wider than a dollar bill) and fits underneath the driver's seat with plenty of room to spare. The amp is extremely well built, impeccably finished, and has alot of great design details. All the wires are secured with allen screws which allows you to tighten them down more strongly without possible stripping of the screw heads as you do with common flat/phillips screw heads. The amp controls are hidden underneath a cover and that the wire connections are all on one side. In my application, all this makes for a VERY clean looking install with no visible wires. The amp also has alot of adjustment switches to make it very flexible in terms of connectivity. The low and high pass filters have defined indentations to allow for precise setting of cutoff frequencies. I bridged two of the channels to power the 8" sub.
The amp seems to power the speakers/sub effortlessly with no audible noise or distortion. I can crank up the volume so loud that it is uncomfortable for me to listen to but the amp still puts out clean sound. It is quite pricey, but well worth the cost. TMK, it is one of the smallest amps on the market that puts out this much power. Overall, a very great purchase!


Click Here to see more reviews about: JL Audio XD400/4 - Amplifier - 4-channel

4-channel car amplifier 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable bridged) variable low- and high-pass filters (50-500 Hz, 12 dB/octave) optional wire remotefor level control Class D amplifier design with NextDTM switching amp technology differential-balanced inputs eliminate noise coming from your vehicle's electrical system Advanced Rollback Protection System prevents thermal shut-down speaker- and preamp-level inputs (speaker-level input requires an optional adapter) preamp outputs 4-gauge power and ground leads and a 40-amp fuse recommended - wiring and hardware not included with amplifier no onboard fuses - when installing multiple amps in a system, an additional 40-amp in-line fuse between the distribution block and the amplifier is recommended 8-1/2"W x 2"H x 7-3/8"D

Get 16% OFF

Click here for more information about JL Audio XD400/4 - Amplifier - 4-channel

Read More...

JL 13TW5-3 Review

Average Reviews:

(More customer reviews)This is my 4th sub from JL Audio. I have owned 10w7s, 12w7s, and 10w3s. This is by far the best spending sub of all of them and I was able to fit this under my floor in my CR-V. If you want amazing sound quality and volume in tight spaces get this sub.

Click Here to see more reviews about: JL 13TW5-3

13.5-inch thin-line subwoofer driver (600W, 3 ohm) 13.5" 3-ohm subwooferradical shallow-mount design with extremely small airspace requirementsmica-filled polypropylene cone with Santoprene rubber surroundcast alloy baskettop-mount depth: 2-1/2"power range: 100-600 wattsRMS peak power handling: 1,200 wattsfrequency response: 20-200 Hzsensitivity: 85.87 dBsealed box volume: 0.8 cubic feetwarranty: 1 year

Get 13% OFF

Click here for more information about JL 13TW5-3

Read More...

Kicker 08ZX7005 ZX-Series 4 x 75-Watt Amplifier With 400-Watt Subwoofer Channel Review

Average Reviews:

(More customer reviews)Had a boss 1000W amp before.this amp could not drive itself. But this kicker is kicking a$$,it has so much extra
power (1080 tested) that i now cant play my system over a 1/4 volume. I have a polk 6.5" and sony explod 6x9 and they are screaming good. For the sub i have a kicker 10" CVR, but this amp is too much for it. Was told by my installer that i will need a CVR 12" to really benefit from the amp, he also said i need to upgrade my mids to component speakers to handle this power. A capacitor is a must too.
An awesome product which tests at 50% more than advertised. That is,the 5th channel is pushing 600+ watts.

Click Here to see more reviews about: Kicker 08ZX7005 ZX-Series 4 x 75-Watt Amplifier With 400-Watt Subwoofer Channel

ZX dominance means severe stereo or mono amplifier power surging into corresponding KICKER subwoofers and speakers. ZX dominance also means the utmost reliability from the biggest name in trouble-free amplification and loud, clear sound.

ZX-Series Amplifiers return for 2008 as reliable as ever--21 no-fault options to run a complete car audio system. Two-channel, four-channel, three- and five-channel hybrids, and absurd single-channel subwoofer amps round out a hard-working, noise-free lineup known for supplying the force until the listener shuts the music down. And now all ZX Amps are outfitted with differential RCA inputs, completely eliminating unwanted whines and audio trash and making for the most enjoyable listening experience possible. Differential inputs and new automatic turn-on modes make ZX Amps some of the most complete power producers on the market.
ZX Multi-Channel and Hybrid Amplifiers Six ZX-Series Multi-Channel Amplifiers put the choice of system installation in your hands. Power ranges from 50 watts x 4 channels up to 215 watts x 4, giving the user plenty of system decisions to make. These amps carry the same crossover and KICKEQ Bass Boost as the stereo amps, but they also include a useful fader dial. Two popular hybrid models among the multi-channel amps feature a sub-rattling, 420-watt Class D channel to go along with 85 watts/channel in the ZX.3 amp and the 85 watts x 4 in the ZX.5 amp. Boost remains available, but through the sub sections only.
ZX700.5 Features
3 automatic turn-on modes
Balanced differential inputs for noise elimination
RCA inputs have direct speaker level input capability
Easily removable top allows for custom painting
Optional end caps
2 ohm stability on all amps
Angled power connections

What's in the Box ZX700.5 amplifier, Mounting hardware, User's manual

Get 55% OFF

Click here for more information about Kicker 08ZX7005 ZX-Series 4 x 75-Watt Amplifier With 400-Watt Subwoofer Channel

Read More...